Untitled Document
Personal Alcohol Detector
Safe Drive Delux
Safe Drive
Safe Drive2
Product Packing
Bad Breath Detector
Kiss Me Meter
Product Packing
Gas Leak Detector
EZ Gas Check
EZ Co Check
Product Packing
Micro Gas Sensor
Alcohol Sensor
Hydrogen Sensor
 
 
EZ Gas Check(Gas Leak Detector)
Home>product>Gas Leak Detector>EZ Gas Check
 
 
EZ Gas Check is a Stick Type Gas Leak Detector which any person can easily use at home. We can easily detect the degree of gas leakage with beep sound and LED light at the same time and we can prevent gas explosion accident in advance.
 
     
   
  Detection of various gases such as LPG and high concentration of LNG

LPG-over 1/10 LEL
LNG(Methane)-over 1/5 LEL
 
*LEL: Lower Explosive Limit

When gas leakage is detected, the unit makes beep sound together with LED light and therefore we can prevent gas explosion accident.

EZ Gas Check is equipped with automatic calibration function.
     
   
  Power Source : 2AA Size Batteries
Sensor type : MEMS Gas Sensor
Display Format : 220 x 30mm
Weight : 84.5g(Include 2AA Batteries)
Display : LED Display, 3signals(Green, Yellow, Red)
Operating Time : Over 40 Hours
 
     
 
 
 
 

1 . Push the button, the main switch, which placed in the middle of gas detector, then the gas detector will be turned on with buzzer alarm.
2. Green, yellow, and red light blink at an interval of 0.5 seconds until the internal gas sensor stabilized. The light blinks in the order of green, yellow, red, yellow, and green.
3. If the gas sensor stabilized, green light is turned on with buzzer alarm. This means that the gas detector is ready for gas detecting.
4. Put the tip of gas detector to the suspicious places of gas leakage, when the detector is ready,
5. If gas detected, the detector displays yellow or red light with buzzer alarm. Yellow light is turned on when there is a little gas. And red light is turned on when there is a lot of gas.
6. Whenever user push the main switch, the gas detector is turned off.