Untitled Document
Personal Alcohol Detector
Safe Drive Delux
Safe Drive
Safe Drive2
Product Packing
Bad Breath Detector
Kiss Me Meter
Product Packing
Gas Leak Detector
EZ Gas Check
EZ Co Check
Product Packing
Micro Gas Sensor
Alcohol Sensor
Hydrogen Sensor
 
 
Safe Drive Deluxe(Alcohol Detector)
Home>product>Personal Alcohol Dectector>safe Drive Deluxe
 
 
Safe Drive Deluxe is a Personal Alcohol Dectector in LCD method, and we can directly confirm the concentration of alcohol in the blood as it displays the concentration in digital figure. As the most advanced MEMS gas sensor was mounted in this product and re-calibration function was equipped, accuracy of measuring is very high.
 
     
   
  Accuracy is very high as ultra-modern MEMS gas sensor was used with re-calibration function in it.

With simple one-touch operation and LCD screen, we can easily confirm the measured value even in a dark place.

Its design is small and quality looking and it is very handy to carry.

Measured value for alcohol is displayed in %, BAC or g/l unit on LCD screen.

Before and after measuring, beep sound signifies the measuring action to measuring person.

Battery lasts longer than other products.
 
     
   
  Power Source : 2 AAA Size Battery
Method : MEMS Gas Sensor
Display Format : LEDDisplay(Display with 13 step from 0.00% to 0.12%)
External Dimansion : 90 × 30 × 16.5mm
Weight : about 43g (Including Dry Cell )
Temperature in use : 0℃ ∼ 35℃
Storage temperature : 0℃ ∼ 70℃
Material : Main case - ABS resin
 
   
 
 
  Before using this product, please make sure that you do re-calibration.  
   
   
  1. Press CAL button under LCD screen for 1~2 seconds, then C,A,L1 is displayed screen, and then countdown from 5 to 0 starts again. When 0 is displayed on LCD screen, blow into the inhaler for 3~5 seconds within 2cm distance with the strength level like whistling on the street. (1st re-calibration)
2. After the 1st re-calibration, wait until LCD screen displays from 9 to 0 after displaying C,A,L2. In the course of displaying 9 to 0, LCD screen displays A,D,J (Adjustment) and then starts counting from 9 or 5 to 0 if alcohol sensor in the Alcohol Detector was not stabilized at that time.
3. If LCD screen displays 0, blow into the inhaler for more than 3 seconds with the strength like whistling (2nd re-calibration)
 
   
 
 
  In the case of using the value obtained after measuring 2~3 times, more accurate result will be obtained.