Untitled Document
Personal Alcohol Detector
Safe Drive Delux
Safe Drive
Safe Drive2
Product Packing
Bad Breath Detector
Kiss Me Meter
Product Packing
Gas Leak Detector
EZ Gas Check
EZ Co Check
Product Packing
Micro Gas Sensor
Alcohol Sensor
Hydrogen Sensor
 
 
Safe Drive(Alcohol Detector)
Home>product>Personal Alcohol Dectector>safe drive
 
 
Safe Drive is a Personal Alcohol Dectector in LED display method. Safe Drive has a Key ring and is equipped with flash and re-calibration function which make very high accuracy.
 
     
   
  As this product uses MEMS gas sensor and is equipped with re-calibration function, accuracy is very high.

Its cute and quality looking design gives pride and convenience to carry.

It uses LED Display and 5 colored lights to display measured value.
   Green Color : Represents 0.00%
   Yellow Color : 0.01~0.02%
   Orange Color : 0.03~0.04%
   Light Red Color: 0.05~0.10%
   thick Red : Represents values over 0.10%
 
     
   
  Power Source : 1 AAA Size Battery
Sensor type : MEMS Gas Sensor
Display Format : LEDDisplay(5 colors)
External Dimansion : 57 x 34 x 13mm
Weight : about 20g (Including Dry Cell )
Temperature in use : 0℃ ∼ 35℃
Storage temperature : 0℃ ∼ 70℃
Power Consumption : 151mA
 
     
 
 
  Before using this product, please make sure that you do re-calibration.
 
   
  1. When pressing down the small button and staying for approximately 3 seconds, the 1st re-calibration starts.
2. After lights quickly travels right and left, green colored light turns on to the most left side.
3. When green colored light is on, blow into the inhaler for approximately 3~5 seconds.
4. When the above 1st re-calibration is finished, 2nd re-calibration continues . While lights travels right and left, wait for approximately 7 seconds to have green colored light on
5. When green colored light is on, blow into the inhaler for 3~5 seconds as same as the procedure in the 1st re-calibration.
6. Power turns off automatically.