Untitled Document
Personal Alcohol Detector
Safe Drive Delux
Safe Drive
Safe Drive2
Product Packing
Bad Breath Detector
Kiss Me Meter
Product Packing
Gas Leak Detector
EZ Gas Check
EZ Co Check
Product Packing
Micro Gas Sensor
Alcohol Sensor
Hydrogen Sensor
 
 
EZ CO CHECK(Portable Co Detector)
Home>product>Gas Leak Detector>EZ CO Check (Portable Co Detector)
 
 
EZ CO Check(Portable Co Detector) are a Stick Type CO leakage detector which any person can easily use at home. User can easily detect the degree of gas leakage with beep sound and LED light at the same time and user can prevent gas poisoning accident in advance.
 
     
   
  Detection of carbon monoxide.
     * Test results are as follows
        Green LED on : safe
        Orange LED on : 50~200ppm
        Red LED on : over 200ppm
 

When gas leakage is detected, the unit makes beep sound together with LED light and therefore we can prevent gas explosion accident.

EZ CO Check is equipped with automatic calibration function
     
   
  Power Source : 2AA Size Batteries
Sensor type : MEMS Gas Sensor
Display Format : 220 x 30mm
Weight : 84.5g(Include 2AA Batteries)
Display : LED Display, 3signals(Green, Yellow, Red)
Operating Time : Over 40 Hours
 
     
 
 
 
 

1 . Push the button, the main switch, which placed in the middle of gas detector, then the gas detector will be turned on with buzzer alarm.
2. Green, yellow, and red light blink at an interval of 0.5 seconds until the internal gas sensor stabilized. The light blinks in the order of green, yellow, red, yellow, and green.
3. If the gas sensor stabilized, green light is turned on with buzzer alarm. This means that the gas detector is ready for gas detecting.
4. Put the tip of gas detector to the suspicious places of gas leakage, when the detector is ready,
5. If gas detected, the detector displays yellow or red light with buzzer alarm. Yellow light is turned on when there is a little gas. And red light is turned on when there is a lot of gas.
6. Whenever user push the main switch, the gas detector is turned off.